Frequently Asked Questions...
These are the technical FAQs for the ABTT forum. It condenses some of questions which have been asked on the Green Room Forum and their replies. If you want to expand or amend an answer to a question, or have information on other technical subjects which you want to add to the FAQ then send your contribution to [email protected] or to the Green Room Forum. The ABTT publishes this information in good faith but no responsibility can be attached to the Association or any of its members or employees for its accuracy or for any liability therefrom. Opinions expressed are not necessarily those of the Association.
Should we use a two or three cue light system?
Posted by Andrew Chesters, DARRENE and Julian Sleath
A two light cue system is better in every way as actors have to press the appropriate buttons to let you know they are there. The system works as follows:-
* SM gives "Standby" outstation and SMs repeater flash RED
* Lovey presses button on outstation, both go to steady RED
* SM switches to go, both sets go GREEN
Any faults are easy to see as the desk and outstation are wired in series.
